2 wheels Wireless Real Time Tire Pressure Monitoring System Motorcycle TPMS with External Sensornsor
high pressure alarm:3.0BAR(43PSI)
low pressure alarm:2.0BAR(29PSI)
temperature unit:℃ (℉)
S:Function setting key
-/P:Back key / power key (long press for 3 seconds to turn on or off)
3,Restore factory settings
With the battery removed, press and hold the "S" and "+" keys, and then install the battery until the screen is fullybright that meansthe factory settings are restored.
The factory setting only restores high pressure alarm, low pressure alarm and high temperature alarm values.
4,Setting interface (S key)
In the main interface, long press "S" key for 3 seconds to enter the setting interface, and then short press "S" key to switch the setting function (as followed: pressure unit setting,
front tire high pressure setting, front tire low pressure setting, rear tire high pressure setting, rear tire low pressure setting, high temperature setting, temperature unit setting, return to the main interface). Short press "+" or "-" to modify the function value.
Short press "s" key to save and exit
5, Tire learning (M key)
In the main interface, long press the "M" key for 3 seconds to enter the tire learning mode
a. Single tire learning: In the learning mode,short press the "M" key to enter the learning of a single tire ID , the corresponding ID will flash, at this time, inflating and deflating this sensor, and it will stop flashing after learning successfully
Short press + or - key to switch tires. Short press "M" key to return to the main interface
b. Quick learning (for factory): In the learning mode, long press + and-at the same time to enter the fast learning mode for two tires learning. "IDAU" is displayed on the screen. at this time, inflating and deflating these 2 sensors.
If the learning is successful, it will automatically save and return to the main interface.
6, Main interface
1. When there is no key operation and no alarm, the backlight will automatically turn off after 5 seconds. Any key and alarm will wake up the backlight
2. In the main interface, short press the + key to enter the interface of temperature display. After 10 seconds, it will automatically return to the interface ofpressure display.
If the host has no vibration induction within 5 minutes, it will automatically sleep until it vibrates again.
The sensor sends data every 2 minutes. When receiving alarm data (high pressure alarm, low pressure alarm, high temperature alarm, sensor’s low power alarm, tire leak alarm):
-Buzzer beeps for 6s
-Vibration motor vibrates for 6S intermittently
-The backlight is on and it will turn off until the alarm sound is cleared after 5 seconds.
-The corresponding tire symbol and data flashes, and the tire alarm indicator is always on until the alarm is cleared.
During the alarm process, press any key to clear the alarm sound and motor vibration, but the corresponding tire symbol and data flashes, and the tire alarm indicator is always on until the alarm iscleared.